Commercial Building

The One-stop Solution for Your Commercial Building System

Commercial Building Cabling Services

CRXCabling participates in designing data structured and fibre optic cabling system of different commercial buildings across the globe and has cabling experiences in a multinational case.

In the wiring design of offices and conference centers of different scales, it is necessary for cabling companies to consider whether the user's seats need to be changed frequently, and the number of cabinets and network outlets required for office areas of different scales.

The distance between the work area and the computer room requires different wiring planning, so the wiring design of commercial buildings will pay more attention to the realization of network connection planning in different work areas.

In structured cabling system, it is recommended to use Cat.6a cable in the cable category and level of the office and conference center because the network speed can be increased from 1G to 10G, 10 times the speed, but it does not cost 10 times the price, and when the system is upgraded in the future, the user only needs to replace the switch instead of re-wiring construction.

By surveying the building site and analyzing user needs, such as large-scale conference and exhibition venues, zone cabling or open office cabling can be used in cabling installation. By placing a certain number of network outlets in the average area, and then setting up the CP point in the column of the venue, then connected to the user equipment. For the wiring of multi-story buildings, we’ll need to consider the location and length of the backbone, the location, and the quantity of the equipment room. But it is important to pay attention to the equipment room needs to be in an appropriate place to avoid the length of the wiring cable exceeding 90m.

The wiring backbone cables are usually optical cables in network cable installation, and copper cables are used for voice and short-distance network transmission. According to the definition of different working areas, the number of working areas and the number of network outlets, patch panel, the length of horizontal cable, and patch cords required can be calculated. The sockets of the phone are mostly equal to the network outlets of the computer. Some reserved safety factors are needed to cope with the future growth and changes of the organization. We recommend using color management which enables IT personnel to complete the move and change more quickly when the organization changes.

The number of fiber cores of the backbone can also be selected based on the bandwidth requirements and future scalability, and some more cores should be reserved to meet future needs. Generally, it is recommended to use OM3 and OM4 multimode fibers, but if the distance from the backbone exceeds several hundred meters, such as the connection between the building and the building, the single-mode fiber optic cables of OS1 and OS2 are used as the basis.

The structure drawing in the wiring plan will fill in the relevant information of the equipment room and the subsystems, and it is also easier to calculate the components and easy to change. The design or modification is determined by the user and the system integrator mutually. After the final design drawing is completed, it's ready for the reparation of materials and construction.

CRXCabling provides cabling services for commercial buildings and conference centers and provides tailor-made wiring plans for your organization. Contact our specialists for solution consultation.