LC to LC OM3 Multimode Fiber Optical Patch Cord Short Boot 1M LSZH Jacket

B40-OM3KLIJJ001

MM OM3 LC Duplex Fiber Cord

LC OM3 Zipcord Patch Cable

LC OM3 Zipcord Patch Cable

Short boot OM3 duplex patch cord is ideal for the high-density data center network environment by its' 18.5mm length boot. The LC to LC fiber patch cable OM3 with bend-resistant fiber gives excellent mechanical protection and excellent transmission quality for networking under IEC and ANSI/TIA standards. The multimode duplex patch cord is compatible with optical fiber equipment's for local area network, optical fiber communication system, and CATV applications.

Features

• Work with high-density cabling environment
• Provide sharper bending radius and flexibility in compact space
• Mechanical protection by zip cord structured
• Performance complies with IEC 60793-2-50 and ANSI/TIA-492AAAx standard

Product Classification

General Specifications

Material Specifications

DownloadAdditional Info

• 

  Specification-Fiber Patch Cord Solution-LC Duplex (Short Boot)

  ---

  LC Duplex (Short Boot) Fiber Optic Patch Cords Specification in SM and OM3, OM4, OM5

  ---

---

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.