Rel-Easy OM3 LC Fiber Optic Patch Cord LSZH 15M

B40-OM3MLIJJ015

OM3 Fiber Optic Patch Cord

OM3 LC Fiber Optic Patch Cord.

OM3 LC Fiber Optic Patch Cord.

The OM3 LOMMF (laser optimized multi-mode fiber) fiber optic patch cord with a special patented design tab can be easy to handle in high-density applications, and the A and B position can be quickly identified Tx and Rx during installation.

The OM3 fiber patch cord carries 10 Gigabit applications in SAN networks and data centers. The maximum transmission distance-10G Ethernet is 300 meters at 850nm and supports SFP transceivers and media converters, Ethernet switches, media converters, industrial Ethernet equipment.

The multimode fiber cable complies with ISO/IEC standards and RoHS regulations. It's the preferred optical fiber specification for a 10G Ethernet connection. Our team brings reliability and optimize performance for network deployment in many projects, contact us for more information now.

Product Classification

General Specifications

Material Specifications

DownloadAdditional Info

• 

  Specification-Fiber Patch Cord Solution-LC Rel-Easy

  ---

  LC Rel-Easy Fiber Optic Patch Cords Specification in SM and OM3, OM4, OM5

  ---

• 

  (User Guide) Rel-Easy Patch Cord

  ---

  For Long Latch Rel-Easy Fiber Patch Cord to quick installation instruction

  ---

---

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.