Fiber Optic OM4 LC Pigtails 0.9mm PVC 1M

B40-OM4CJAJX001

OM4 Fiber LC Pigtails with Zirconia Ferrule Connector.

OM4 Fiber LC Pigtails with Zirconia Ferrule Connector.

The OM4 fiber LC pigtails with zirconia ferrule connector can provide better and more accurate transmission. This LC fiber pigtail is used for fiber splicing for a fiber patch panel and termination box that bring you quality fiber termination.

The OM4 fiber pigtail can be used for optical fiber local area networks, optical fiber communication systems, and instruments. We provide a variety of single-mode and multi-mode fiber jumpers and fiber pigtails, contact us for complete product information.

Features

• Low Insertion Loss: 0.3dB
• High Return Loss: 35dB
• Ideal for Fiber Optic Communication System
• Meets FOCIS and TIA/EIA-568-B.3 standards

Product Classification

General Specifications

Material Specifications

DownloadAdditional Info

• 

  Specification-Fiber Patch Cord Solution-LC Pigtail

  ---

  LC Pigtail Fiber Optic Patch Cords Specification in SM and OM3, OM4, OM5

  ---

• 

  Data Sheet-LC Fiber Pigtail

  ---

  LC Fiber Pigtail Data Sheet.

  ---

---

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.