OM5 Multimode LC to LC Fiber Patch Cord 2M LSZH Jacket

B40-OM5KPIJJ002

OM5 LC Duplex OptLCal Patch Cord

LC OM5 Duplex Zipcord Patch Cord

LC OM5 Duplex Zipcord Patch Cord

Bend-resistant LC to LC OM5 Fiber Patch Cord offer protection and quality transmission, and follow TIA/EIA 492AAAx and IEC60793-2-10 standards. The OM5 fiber Patch Cord LC to LC is ideal for data center, housing, education, LAN, SAN, commercial applications in data, video, and voice services.

Features

• Mechanical protection by zip cord structured
• Performance complies with IEC 60793-2-10 and ANSI/TIA-492AAAx standard
• Commonly used in passive applications: GPON, FTTX and LANs

Product Classification

General Specifications

Material Specifications

DownloadAdditional Info

• 

  Specification-Fiber Patch Cord Solution-LC Duplex (Standard Boot)

  ---

  LC Duplex (Standard Boot) Fiber Optic Patch Cords Specification in SM and OM3, OM4, OM5

  ---

• 

  Data Sheet-LC-Data Sheet-LC Zipcord Fiber Path Cord

  ---

  LC-LC Zipcord Fiber Path Cord Data Sheet

  ---

---

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.