Duplex LC OM5 Fiber Patch Cord PVC OFNP with LED Self-Tracking 4M

B40-OM5OPEJJ004

OM5 LC LC Patch Cord

The OM5 fiber patch cord is specially designed for a high-density solution, allowing you to easily unplug the cable. The LED self-tracking function enables you to find the required fiber patch cord in a few seconds. The ceramic ferrule features high return loss, low insertion loss, and low attenuation characteristics, providing precise alignment to ensure signal integrity.

OM5, Wideband Multimode Fiber (WBMMF), has four channels, and the transmission capacity is increased by four times, and it supports 100G Ethernet applications and extending the maximum transmission distance to 150 meters. Its' cost and power consumption are much lower than single-mode fiber. Therefore, the OM5 multimode fiber will be widely used in 100G / 400G /1T data centers subsequently.

The fiber optic multimode OM5 uses the same 850nm wavelength as OM3 / OM4, which is backward compatible. As your network upgrades to faster 100/400Gb speeds, there is no need to replace new cables. It is our top priority to quickly deploy your network, and bring reliability, please contact us for agency cooperation.

Product Classification

Indoor or Outdoor	Indoor, Outdoor
Solution	Fiber
Product Name	Fiber Patch Cord

General Specifications

Item model number	B40-OM5OPEJJ004
Color	Lime Green
Length(M)	4
Connector Type	LC

Material Specifications

Jacket	PVC OFNP
Material	Zirconia, PC, OFNP
Fiber Mode	OM5
Fiber Count	2
Insertion Loss	<0.3dB
Return Loss	>35dB
Polish Type	PC
Cable Diameter	3.0 mm
Polarity	A(Tx) to B(Rx)

DownloadAdditional Info

• 

  Specification-Fiber Patch Cord Solution-LC LED Rel-Easy

  ---

  LC LED Rel-Easy Fiber Optic Patch Cords Specification in SM and OM3, OM4, OM5

  ---

• 

  Data Sheet-LED Rel-Easy Fiber Patch Cord

  ---

  LED Rel-Easy Fiber Patch Cord Data Sheet

  ---

---

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.