Single Mode UPC Zipcord FO Patch Cord Zipcord 30M in PVC Jacket

B40-SM1KIADD030

Single Mode UPC LC to LC Fiber Patch Cord

LC duplex single mode patch cord with excellent mechanical protection present excellenct transmission quality for networking under IEC and ANSI/TIA standards. The fiber optical patch cord is compatible with optical fiber equipments for local area network, optical fiber communication system, and CATV applications.

Features

• Mechanical protection by zip cord structured
• Performance complies with IEC 60793-2-50 and ANSI/TIA-492CAAx standard
• Commonly used in passive applications: GPON, FTTX and LANs

Product Classification

Indoor or Outdoor	Indoor
Solution	Fiber
Product Name	Fiber Patch Cord

General Specifications

Item model number	B40-SM1KIADD030
Color	Yellow
Length(M)	30
Connector Type	LC

Material Specifications

Jacket	PVC
Fiber Mode	SM
Fiber Count	2
Insertion Loss	<0.2dB
Return Loss	>55dB
Polish Type	UPC
Cable Diameter	2.0mm x 4.2mm
Polarity	A(Tx) to B(Rx)

Download

• 

  Data Sheet-LC-Data Sheet-LC Zipcord Fiber Path Cord

  ---

  LC-LC Zipcord Fiber Path Cord Data Sheet

  ---

---

Additional Info

The Difference of Single-Mode (SM) and Multi-Mode (MM) Fiber

• The core diameter of single-mode fiber is much smaller than multimode fiber, the single-mode fiber core diameter is 9µm; the single-mode fiber wavelength is 1310 nm and 1550 nm. 
• Multimode fiber core diameter: 50µm or 62.5µm. 850nm and 1300nm wavelengths are used in multimode fiber cables.

Transmission distance is the key to choosing single-mode or multi-mode fiber, for data centers, multi-mode fiber optic cables are sufficient to meet the distance of 300 - 400 meters. In applications that require distances of up to several kilometers, single-mode fiber is the best choice.

Fiber Path Cord Polish Matters

The light loss will occur when a connector is installed, yet some will cause damage to laser light and disrupt the transmitted signal. Choosing the well polish connector will reduce the back reflections of light.

• PC: Physical Contact polish with -35dB Return Loss measurement
• UPC: Ultra Physical Contact polish with -55dB Return Loss measurement
• APC: Angled Physical Contact polish (8-degree angle) with -60dB Return Loss measurement

Can I mix single-mode and multi-mode fiber?
The core sizes of multimode fiber and single-mode fiber are different, and the transmitted light mode is also different. If two optical fibers are mixed or directly connected together, a large amount of optical loss will be lost, resulting in link jitter or disconnection. Remember, never mix different types of cables randomly.