PVC CM Rated 24AWG F/UTP Shielded Cat.5E Cable 305M

A17-5EFTGY24C6

Cat.5e STP LAN Cable

CA5E FTP Lan Cable meets ISO/IEC 11801 and TIA/EIA 568.2-D standards in addition to RoHS compliance. The aluminum foil shield wire helps eliminate cross-talk and avoid electromagnetic interference. CRXCabling's Shielded Cat.5E Cable is easily compatible for 1 Gigabit Ethernet needs, and reaches the high bandwidth up to 100MHz. The copper wiring conductor of this cable is 24 AWG which offers less heat and less resistance which allows signal transmission to travel greater length and this cable totally meet your requirement of network.

CRXCabling Lan Cables provide universal connectivity for network components, and support a selection of network devices that include; computers, servers, modems, telephones, smart televisions, and more.

Features

• Meet TIA-568.2-D and RoHS compliant
• Polyolefin (PO) insulation provides better chemical resistance and enhanced durability.
• Compatible for 1 Gigabit Ethernet needs, and reaches the high bandwidth up to 100MHz.
• Solid core conductors allow long distance runs while preserving optimal performance.
• The PVC jacket is flame, CM rated.

Product Classification

Indoor or Outdoor	Indoor
Solution	Copper
Product Name	Lan Cable
Component Category	Cat.5E

General Specifications

Item model number	A17-5EFTGY24C6
Color	Grey
Shielded Type	Shielded
Length(M)	305

Material Specifications

Jacket	PVC
Material	Conductor: Bare Copper
Wire Gauge	24
Cable Type	F/UTP
Cable Diameter	6.1 ± 0.2 mm

DownloadAdditional Info

• 

  Specification-Data LAN Cable-Cat.5E FTP PVC Jacket

  ---

  Data LAN Cable-Cat.5E FTP PVC Jacket Specification

  ---

---

Solid: Also called single-strand wire, consists of one piece of metal wire, and generally used for in-wall wiring.

Stranded: Composed of small-gauge wires to make a larger conductor and more flexible.

PVC: Made of polyvinyl chloride jacket, commonly used for horizontal runs from the wiring center.

LSZH: Low smoke zero halogen has a flame-resistant jacket that doesn't emit toxic fumes even if it burns.

CM: The 'M' in CM is for 'Multipurpose'. CM rated cable general use in where the fire code does not place any restrictions on cable type and suitable for in-wall installation.

CMR: The 'R' in CMR is for 'Riser'. CMR rated cables are aimed to prevent the spread of fire from floor to floor and are suitable for vertical shaft applications.

CMP: The 'P' in CMP is for 'Plenum'. CMP rated cables are suitable for installation in ducts and plenums without the use of conduit. These cables are designed for fire resistance and low-smoke and toxin producing characteristics.

CMX: The 'X' in CMX is for 'Outside Plant'. CMX rated cables are suitable for installation in outdoor applications where exposed to the elements, resisted the UV retardant.